XiNCOM Corp.
7. Enter
admin
for the "User Name" and leave the "Password" blank.
•
The "User Name" is always
admin
•
You can and should set a password, using the following
Admin Password
screen.
No Response?
•
Is your PC using a Fixed IP address?
If so, you must configure your PC to use an IP address within the range 192.168.1.2 to
192.168.1.254, with a
Network Mask
of 255.255.255.0. See
Appendix B – Windows
TCP/IP Setup
for details.
•
Check that the XC-DPG Twin WAN Router is properly installed, LAN connection is
OK, and it is powered ON.
8. After the login, you will then see the
Admin Password
screen, as shown below.
Assign a password by entering it in the "Password" and "Verify Fields.
Figure 5: Home Screen (Admin Password) XC-DPG502 shown
Page 11
