xiJ - Technical Manual Version 0.06
4
1.3.
Standard Conformity
The xiJ cameras have been tested using the following equipment:
•
Host adapter card, connector Type-A, ref. Asmedia ASM3142 - PCIe USB card U31-PCIE2XG321
•
Shielded USB 3.0 Type-A to micro-B cable ref. CBL-U3-3M0 (3m)
•
USB type C power injector adapter ref. ADPT-PWR-INJ-TC
•
Shielded USB 3.1 Type-C to Type-C cable ref. CBL-U31TC-3M0 (3m)
•
Power cable ref. CBL-MJ-PWR-2M0
•
Power supply 5-24V DC
Warning: Changes or modifications to the product or the environment may render it ineligible for operation under CE, FCC or
other jurisdictions.
XIMEA recommends using the above configuration to ensure compliance with the following standards:
1.3.1.
CE Conformity
The xiJ cameras described in this manual comply with the requirements of the
•
EC EMC Directive 2014/30/EU electromagnetic compatibility of equipment
1.3.2.
For customers in the US: FCC Conformity
The xiJ cameras described in this manual have been tested and found to comply with Part 15 of the FCC rules, which states
that:
Operation is subject to the following two conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the users will be required to correct the
interference at their own expense.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate
this equipment under above jurisdictions. The shielded interface cable recommended in this manual must be used with this
equipment in order to comply with the limits for a computing device pursuant to Subpart J of Part 15 of FCC Rules.
1.3.3.
For customers in Canada
The xiJ cameras comply with the Class A limits for radio noise emissions set out in Radio Interference Regulations.
1.3.4.
RoHS Conformity
The xiJ cameras comply with the requirements of the RoHS (Restriction of Hazardous Substances) Directive
2011/65/EU.
1.3.5.
WEEE Conformity
The xiJ cameras comply with the requirements of the WEEE (waste electrical and electronic equipment) Directive
2012/19/EU.
