Xilinx Virtex-6 FPGA, Getting Started Manual

Page: 51 / 77

Virtex-6 FPGA Connectivity Kit Getting Started www.xilinx.com 51
UG664 (v1.4) July 6, 2011
Modifying the Virtex-6 FPGA Targeted Reference Design
After InstallShield Wizard completes, Add Hardware Wizard is launched ( Figure 46 ).
Click on Next .
The xdma driver and child drivers xrawdata and xaui are loaded manually through
the Found New Hardware Wizard.
To load the recompiled xdma driver, select Install from a list or specific location and
click Next . Browse and choose
v6_pcie_10Gdma_ddr3_xaui_axi\compiled_drivers\xdma
, and click Next .
The Xilinx DMA driver is installed and associated with the Connectivity TRD
hardware. Click
Finish to load the next driver ( Figure 47 ).
X-Ref Target - Figure 46
Figure 46: Launch Add Hardware Wizard
UG664_76_052011