16
Virtex-6 FPGA Connectivity Kit Getting Started
UG664 (v1.4) July 6, 2011
Getting Started with the Connectivity Targeted Reference Design Demo
8.
Copy the contents of the USB flash drive:
a.
The reference design files are provided on the USB flash drive delivered with the
connectivity kit.
b. Insert the USB flash drive into a USB connector of the PC system and copy the
v6_pcie_10Gdma_ddr3_xaui_axi
folder to the PC system.
Note:
Ensure that the path where the
v6_pcie_10Gdma_ddr3_xaui_axi
folder is located does
not have spaces.
9.
Install the drivers and GUI:
a.
Navigate to the
v6_pcie_10Gdma_ddr3_xaui_axi
folder.
b. Double click on
x_v6_trd_setup.exe
(
).
X-Ref Target - Figure 7
Figure 7:
Run
x_v6_trd_setup.exe
UG664_5
8
_060
8
11
Summary of Contents for Virtex-6 FPGA
Page 1: ...Virtex 6 FPGA Connectivity Kit Getting Started Guide UG664 v1 4 July 6 2011 XPN 0402826 03...
Page 4: ...Virtex 6 FPGA Connectivity Kit Getting Started www xilinx com UG664 v1 4 July 6 2011...
Page 6: ...6 www xilinx com Virtex 6 FPGA Connectivity Kit Getting Started UG664 v1 4 July 6 2011...