
UART Driver Install
Determine the COM Port numbers for your system
Open the Device manager
Control Panel
→
System
→
Device Manager
– There will be two “Silicon Labs Dual CP210x” COM ports,
Standard
and
Enhanced
– The Standard COM Port is the FPGA UART COM Port
– The Enhanced COM Port is the System Controller COM Port
– The COM Port numbers
will vary
from system to system
These COM Port Numbers will be used in several of the tutorials
Note:
Presentation applies to the VCU110
Summary of Contents for VCU110
