Xilinx ML403 Application Note Download Page 1 | Manualshive

Page: 1 / 33

background image

XAPP979 (v1.0) February 26, 2007

www.xilinx.com

1

© 2007 Xilinx, Inc. All rights reserved. All Xilinx trademarks, registered trademarks, patents, and further disclaimers are as listed at

http://www.xilinx.com/legal.htm

. PowerPC is

a trademark of IBM Inc. All other trademarks and registered trademarks are the property of their respective owners. All specifications are subject to change without notice.

NOTICE OF DISCLAIMER: Xilinx is providing this design, code, or information "as is." By providing the design, code, or information as one possible implementation of this feature,
application, or standard, Xilinx makes no representation that this implementation is free from any claims of infringement. You are responsible for obtaining any rights you may
require for your implementation. Xilinx expressly disclaims any warranty whatsoever with respect to the adequacy of the implementation, including but not limited to any warranties
or representations that this implementation is free from claims of infringement and any implied warranties of merchantability or fitness for a particular purpose.

Summary

This application note describes how to build a reference system for the On-Chip Peripheral Bus
Inter IC (OPB IIC) core using the IBM PowerPC™ 405 Processor (PPC405) based embedded
system in the ML403 Embedded Development Platform. The reference system is Base System
Builder (BSB) based.

An IIC primer is given and an OPB IIC register reference is provided. The Xilinx Microprocessor
Debugger (XMD) commands are used for verifying that the OPB IIC core operates correctly.
Several software projects illustrate how to configure the OPB IIC core, set up interrupts, and do
read and write operations. Some of the software projects interface the OPB IIC to the
MicroChip 24LC04B serial EEPROM with an IIC interface, while others interface to the
TotalPhase Aardvark Adapter, which provides IIC master and slave functionality. The procedure
for using ChipScope™ to analyze OPB IIC functionality is provided. The steps used to build a
Linux kernel using MontaVista are listed. Simulation output files for analyzing basic IIC
transactions are provided.

Included
Systems

This application note includes one reference system:

www.xilinx.com/bvdocs/appnotes/xapp979.zip

The project name used in xapp979.zip is ml403_ppc_opb_iic.

Required
Hardware/Tools

Users must have the following tools, cables, peripherals, and licenses available and installed:

•

Xilinx EDK 8.2.02i

•

Xilinx ISE 8.2.03

•

Xilinx Download Cable (Platform Cable USB or Parallel Cable IV)

•

Monta Vista Linux v2.4 Development Kit

•

Modeltech ModelSim v6.1d

•

ChipScope v8.2

Application Note: Embedded Processing

XAPP979 (v1.0) February 26, 2007

Reference System: OPB IIC Using the
ML403 Evaluation Platform

Author: Paul Glover, Ed Meinelt, Lester Sanders

R

1
2
3
...
»

Summary of Contents for ML403


































Reviews:

No comments

Related manuals for ML403

Brand: ZALMAN Pages: 20

Brand: National Instruments Pages: 11

Brand: Raritan Pages: 4

Brand: Alesis Pages: 46

Urban Wireless CC-VT240W

Brand: Cateye Pages: 15

Brand: Fostex Pages: 20

Brand: IBA Pages: 33

Brand: IOtech Pages: 16

Brand: Ista Pages: 16

Brand: PairGain Pages: 80

LITTLE BOARD P5X

Brand: Ampro Corporation Pages: 121

Brand: Planet Pages: 20

Brand: JETWAY Pages: 63

Brand: Kontron Pages: 32

Brand: Proxim Pages: 65

Brand: Advantech Pages: 59

Brand: Toshiba Pages: 38

Brand: Sanyo Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands