Xilinx LogiCORE MicroBlaze, Product Manual

Page: 5 / 64

MicroBlaze Micro Controller System v1.3 www.xilinx.com 4
PG048 December 18, 2012 Product Specification
Introduction
The LogiCORE™ MicroBlaze™ Micro Controller
System (MCS) is a complete standalone
processor system intended for controller
applications. It is highly integrated and includes
the MicroBlaze processor, local memory for
program and data storage as well as a tightly
coupled I/O module implementing a standard
set of peripherals.
The MicroBlaze processor included in the MCS
has a fixed configuration, optimized for
minimal area. The full-featured MicroBlaze
processor is available in the ISE® Design Suite
Embedded Edition and the Vivado™ IP
integrator.
Features
• MicroBlaze processor
• Local Memory
• MicroBlaze Debug Module (MDM)
• Tightly Coupled I/O Module including
°
I/O Bus
°
Interrupt Controller using fast interrupt
mode
°
UART
°
Fixed Interval Timers
°
Programmable Interval Timers
°
General Purpose Inputs
°
General Purpose Outputs
IP Facts
LogiCORE IP Facts Table
Core Specifics
Supported
Device Family
(1)
Zynq™-7000
(2)
, Virtex
®
-7, Kintex™-7, Artix™-7,
Virtex-6, Virtex-5, Spartan
®
-6, Virtex-4,
Spartan-3
Supported User
Interfaces
Local Memory Bus (LMB), Dynamic
Reconfiguration Port (DRP)
Resources See Table 2-2 .
Provided with Core
Design Files
ISE: VHDL
Vivado: RTL
Example
Design
Not Provided
Test Bench Not Provided
Constraints File Not Provided
Simulation
Model
Verilog and/or VHDL Structural
Supported
S/W Driver
(3)
Standalone
Tested Design Flows
(4)
Design Entry
ISE Design Suite 14.4
Vivado Design Suite 2012.4
(5)
Simulation
Mentor Graphics ModelSim
Vivado Simulator
Synthesis
Xilinx Synthesis Technology (XST)
Vivado Synthesis
Support
Provided by Xilinx @ www.xilinx.com/support
Notes:
1. For a complete listing of supported devices, see the release
notes for this core.
2. Supported in ISE Design Suite implementations only.
3.
Standalone driver details can be found in the EDK or SDK
directory (<
install_directory >/doc/usenglish/
xilinx_drivers.htm). Linux OS and driver support information is
available from
//wiki.xilinx.com
.
4. For the supported versions of the tools, see the Xilinx Design
Tools: Release Notes Guide .
5. Supports only 7 series devices.