22
KC705 Getting Started Guide
UG913 (v4.1.1) March 7, 2014
Appendix A:
Communicating with the KC705 USB-UART
If the Silicon Labs CP210x USB to UART bridge does not appear in the Ports list, a
reboot of the computer might be required. After rebooting, repeat
.
7.
If using TeraTerm as the serial communications utility program, right-click on the
Silicon Labs CP210x USB to UART
bridge
and select
Properties
.
a.
Click on the
Port Settings
tab and then click
Advanced
.
b. Set the COM port to an open COM port setting from COM1 to COM4. The COM
port setting for the user system might be different from the one shown in
8.
Click
OK
to exit all open windows.
The Silicon Labs USB-UART VCP driver is now installed.
X-Ref Target - Figure A-2
Figure A-2:
Setting the COM Port for the Silicon Labs USB to UART Bridge Driver
UG91
3
_
a
B_02_050212
