Xilinx EK-U1-VCU128-G-J Page 97 User Manual Download

Page: 97 / 101

Appendix D

Additional Resources and Legal

Notices

Xilinx Resources

For support resources such as Answers, Documentation, Downloads, and Forums, see

Xilinx

Support

Documentation Navigator and Design Hubs

Xilinx

Documentation Navigator (DocNav) provides access to Xilinx documents, videos, and

support resources, which you can filter and search to find information. To open DocNav:

• From the Vivado

IDE, select Help → Documentation and Tutorials.

• On Windows, select Start → All Programs → Xilinx Design Tools → DocNav.

• At the Linux command prompt, enter

docnav

Xilinx Design Hubs provide links to documentation organized by design tasks and other topics,
which you can use to learn key concepts and address frequently asked questions. To access the
Design Hubs:

• In DocNav, click the Design Hubs View tab.

• On the Xilinx website, see the

Design Hubs

page.

Note: For more information on DocNav, see the

Documentation Navigator

page on the Xilinx website.

Appendix D: Additional Resources and Legal Notices

UG1302 (v1.1) April 21, 2021

www.xilinx.com

VCU128 Board User Guide

Send Feedback

Summary of Contents for EK-U1-VCU128-G-J






































































































Search results

Summary of Contents for EK-U1-VCU128-G-J

Reviews:

Related manuals for EK-U1-VCU128-G-J

Brands by name

Popular brands

Xilinx EK-U1-VCU128-G-J, User Manual

Search results

Summary of Contents for EK-U1-VCU128-G-J

Reviews:

Related manuals for EK-U1-VCU128-G-J

Brands by name

Popular brands