7
Note: DHCP enabled Router/switch gear should be turned on first, with all Ethernet cables
connected to the hardware prior to Powering ON the hardware. This will allow for proper IP
address distribution to the Hardware.
First, Power ON the router/switch gear.
Then connect an Ethernet cable from the host computer to the DHCP enabled router.
Connect an Ethernet cable from the router to the PoE switch.
Then connect another Ethernet cable from the PoE switch to the XTouch control(s).
A) Connecting using a DHCP enabled router/server
B) Non-DHCP direct connection or indirect connection
Non-DHCP connections are not automatic. Non-DHCP connections must be manually configured.
Please refer to Xilica Designer help file or Xilica FAQ for further assistance.
