7
Device Connectivity
Xilica processors and control devices run on a network based infrastructure and are set up
and controlled by a host computer using the Xilica Designer software.
What’s in the Box
• XIO hardware device
• 90-240 VAC 50-60Hz power cable
What you need to Provide
•
Computer
• Network interface (Router, PoE switch)
A router is used for IP assignment and easy connectivity to computer and control devices.
A PoE switch is used for controllers if local power is not used.
• Ethernet cables
All wired connections use a standard RJ45 Cat 5/6 (Ethernet) connection.
Connecting Devices
A network connection can be made between the computer and processor using:
A) DHCP enabled Router or Server/Router combination (Recommended)
With DHCP enabled routers and servers, the processor will automatically obtain the IP
address upon power up and connection. When other Xilica wall controls will also be used, it is
recommended to use a router and PoE switch. This combo provides DHCP as well as power to the
wall controls. Linksys routers and Netgear switches are recommended.
B) A non-DHCP direct connection or indirect connection via an Ethernet switch
When the processor is connected directly to a computer or indirectly via a switch/hub and DHCP is
not available, the connection process is not automatic.
Summary of Contents for SOLARO XIO 16
Page 1: ...1 XIO 16 User Manual...
