Quick Start Guide
Rio Series
–
R22 and R44 Models
___________________________________________________________________
Xilica Audio Design Canada
Page 6
www.xilica.com
As shown below in our processor
software’s Project View work area, the project design example is using an 8x8 I/O
Neutrino A0808-N Dante enabled processor (but it could be an Uno-N Dante enabled DSP as well). The user will
drag the appropriate quantity of Dante Virtual Transmitters or Receivers required (one per externally connected
Dante device) and drop them onto the
Project View work area’s input and/or output side. Transmitter modules on the
input side and Receivers modules on the output side.
Since we are preparing to add one 2x2 I/O - Rio R22 Dante interface to the Network inputs and one 4x4 I/O
– Rio
R44 Dante interface to the Network outputs of our system design, we have dropped/placed one Dante Virtual
Transmitter module on the input side and used the right side Properties Menu to size it to two (2) inputs and placed
one Dante Virtual Receiver module on the output side - sized to four (4) outputs to accommodate the R44 Dante
interface that will connect to the Network audio output channels of choice on our processor.
Next, as indicated by the blue arrows above, you wire them to the processor modules applicable Network Inputs and
Network Outputs and to complete the procedure, we need to provide
Source Labels
for the
Virtual Transmitter
on
the input side and
Destination Labels
for the
Virtual Receiver
on the output side.
Source and Destination labels
Below we show the Dante Virtual Transmitter and Receiver modules with their
Source
and
Destination
labeling
inserted. You label each source and destination label by clicking on the green connecting wire and typing in the
label in the right menu under Source Label and Destination Label. The label can be anything you desire in
relationship to what brand of external Dante device you have connected to our processors inputs and outputs.
Below I have labeled the Virtual Transmitter as
R22 Output 1 & 2
and the output Virtual Receiver as
R44 Inputs
1 thru 4
with the arrows below pointing to the Source Label and Destination Label location and labeling result.
i
