XIEGU COMMUNICATIONS
8
3.
Operating instructions
3.1
Wiring connection method
3.1.1
Method for connecting XPA125 with X108G
The XPA125 can be directly connected to an X108G, which can then control
the band switching and ALC functions of the amplifier.
-
The ACC data cable supplied with the XPA125 is connected between
the ACC ports of the two units. Both connectors are the same so
either end of the cable can be connected to either socket.
-
Use suitable RF coaxial cable to connect the X108G ANT port to the
XPA125 TRX port.
-
XPA125 ANT port should be connected to the antenna.
3.1.2
Method for connecting XPA125 with X5105
Use the dedicated connection cable CN-115 to connect the X5105 ACC port with
the XPA125 ACC port. Please note the need to distinguish between the different
plugs of the connection cable CN-115.
3.1.3
Method for connecting XPA125 with X1M
As the X1M does not have a dedicated ACC interface and PTT signal output, it
can’t be directly connected to the XPA125. A CN-17 converter is required to
connect an X1M to the XPA125.