DFN menu - Quick Reference
DFL menu - Quick Reference
<1> NR
NR DEPTH
NB
NB WIDTH
NB LEVEL
Noise reduction
switch
Noise reduction
depth
Pulse blanking
switch
Pulse width
Pulse depth
<2> DNF
DNF CENTER
DNF WIDTH
Digital trap switch
Trap center
frequency point
Trap bandwidth
FILTER1
FILTER2
FILTER3
DEFAULT
CLOSE
Filter 1
Filter 2
Filter 3
Reset filter to
default
parameters
Exit
1) Select Filter 1-3 to enter.
2) Short press the MFK knob to switch and
select different edge-cut filters. The blue
trapezoidal box is the high-cut filter (H-CUT),
and the red trapezoidal box is the low-cut
filter (L-CUT).
3) Rotate the MFK knob to adjust the
parameters of the filter. After adjustment the
current filter parameters will be automatically
stored.
4) Short press [DEFAULT] to restore the filter
parameters selected to default parameters.
5) Short press [CLOSE] to exit the filter
interface.
6) The start frequency and cut-off frequency of
the filter can be adjusted, and the
overlapping region of the two trapezoidal
filter graphs is the actual range of the filter.
Prepared by M0ODH (C)2022
