Charging and Maintenance of Build-in Battery
10
X5105 has a built-in 3800mAh polymer lithium battery pack. When there is no external power supply connected, the battery pack
will supply power for the whole device. When external power supply is provided, the built-in circuit will be automatically switched to the
external power supply.
5. The maximum charging time is 10-12h. Charging will be
automatically stopped when battery is fully charged, and the
screen will display charging finishing information as shown in
right figure.
Voltage of battery is generally between 12.1~12.5V after
charging.
Charging method:
1. Enter system menu #9:Charger;
2. Rotate large knob and select 'ON', and then enable charging
function;
3. Select 'OFF' to disable charging function when operating.
4. Set voltage of external power supply between 13.5V~15.0V
and connect to the power supply port of external power source,
and then the main machine will be automatically charged.
Note: X5105 will be automatically charged and T/R indicator
light will be red when charging function is enabled and
connected with appropriate external power supply under
shutdown state. T/R indicator light will be green when
charging is finished.
Vext=13800mV
Vbat=11800mV
Charging…
Information displayed on screen when
charging under shutdown state
Vext
：
Display voltage of external power supply
Vbat
：
Display current real-time voltage of battery
Vext=13800mV
Vbat=12200mV
Charge Finish
Information displayed on screen after charging
