8
3.2.5: Attenuator on/off
Press the frequency knob to switch the current menu page, then press [
ATT
].
When the attenuator is on, ATT will be highlighted. Press this button again to close the attenuator.
When the attenuator is off, ATT will appear dark. The attenuator provides 10 dB attenuation.
3.2.6: Automatic Gain Control on/off
Press the frequency knob to switch the current menu page, then press [
AGC
].
AGC options are Fast or Slow with the screen showing the current status. Press [
AGC
] again to exit.
3.2.7: Noise Blanker on/off (if equipped)
Press the frequency knob to switch the current menu page, then press [
NB
]. The Noise Blanker offers
depth of NB1 thru NB4, with the screen showing the current status.
3.2.8: Switching between VFO-A / VFO-B
Press the frequency knob to switch the current menu page, then press [
A/B
]. You can toggle between
VFO-A and VFO-B.
3.2.9: Set both VFO's to the same settings
Press the frequency knob to switch the current menu page, then press [
A=B
]. The settings of the
current VFO will transfer to the second VFO.
3.2.10: Split frequency operations
Press the frequency knob to switch the current menu page, then press [
SPLIT
].
The radio will receive on VFO-A and when you press PTT, transmit on VFO-B.
3.2.11: RIT tuning
Press the frequency knob to switch the current menu page, then press [
RIT
].
Turning the frequency knob will change the receive frequency but leave the
transmit frequency unchanged. Pressing [
RIT
] again will exit this mode.
3.2.12: Transmit power setting
Press the frequency knob, switch the current menu page, then press [
POW
], power settings on the
screen will display the “Po”, press the button [
UP/DOWN
], you can change the transmit power value
and save it.
3.2.13: Switching between Frequency Mode / Channel Mode
Press the frequency knob to switch the current menu page, then press [
V/M
].
Press this function key to move between frequency mode and channel mode.
3.2.14: Move current channel to VFO
Press the frequency knob to switch the current menu page, then press [
M>V
].
The radio will switch to VFO mode, showing information from the current channel.
Summary of Contents for X108G
Page 17: ...www cqxiegu com XIEGU...
