10
05.CW TONE: CW mode side tone tone setting;
06.CW TDLY: CW transmission delay setting;
07. KYR SPD: Automatic telegraph key transmission rate setting;
08.TXP TIM: Long-term protection time setting, in seconds;
09.BRITNES: screen brightness setting;
10.CNTRST: screen contrast setting;
11.FBND TX: Non-amateur frequency prohibition of launch settings;
12.DDS CLK: DDS clock setting;
13.DDS MLT: DDS multiplier setting;
14.RST ALL: The project menu parameters are reset. Select this item, set 0 to 1, exit the item, press the LK/SYS
button, rotate the frequency knob, select yes, press the frequency knob again to exit the project
menu, then switch the machine again, the setup parameters of the project menu will be restored. To
the default parameters.
★
After all settings have been adjusted, press the frequency knob to exit the item, then press the “LK/SYS” button.
The system prompts whether to save the settings and displays “NO” and “Yes”. Rotate the frequency knob to
select the corresponding item and press it again. The frequency knob exits the project menu..
