background image

For use only with xiaowa CDZ03RR or CDZ04RR charger.Recharge only with the charger specified by the 
manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with 
another battery pack.
Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of
injury and fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush 
with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation 
or burns.
Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit 
unpredictable behavior resulting in fire, explosion or risk of injury.
Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 
130°C may cause explosion.
Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range
specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage 
the battery and increase the risk of fire.
Have servicing performed by a qualified repair person using only identical replacement parts.This will ensure that
the safety of the product is maintained.
Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use
and care.
Place the cords from other appliances out of the area to be cleaned.
Do not operate the vacuum in a room where an infant or child is sleeping.
Do not operate the vacuum in an area where there are lit candles or fragile objects on thefloor to be cleaned.
Do not operate the vacuum in a room that has lit candles on furniture that the vacuum may accidentally hit or 
bump into.
Do not allow children to sit on the vacuum.

Safety Information

2

Summary of Contents for Lite C1 Series

























Reviews: