2
From the Manual titration interface, press the
Start/Stop button to start therapy. You can choose
“Setting” to personalize your options, and “Message” to view therapy information.
Figure4 Titration interface A
Figure5 Titration interface B
Service Guide
1. Entering service interface: From the therapy interface, press both the
“+” and “-” buttons and hold for
three seconds. The interface will be shown as below:
Figure6 Service interface
2. Parameters setting
From the service interface, press the
“+” and “-” button to toggle between different options and
options on the interface, press the
“ok” button to choose an option or setting that is highlighted. Or
you can choose an option or setting by directly touching on the interface at corresponding area.
The available options and settings are shown in the chart below:
Option/Setting
Value
Run time
---*
Filter period
One month/Two months/Three months/Six months
D
efault setting
>>**
Pressure cal.
>>**
*Running time of the blower is shown here and cannot be changed by users.
**Requires further operation. Will be explained in following contents.
