2. Do not use this product in a lamp with a light
modulator to avoid damage to the product. (such
as a table lamp with a light modulator)
3. Do not use the product in a wet environment.
4. Using the light bulb in a narrow ill-ventilated tube
lamp shade is not recommended because this may
cause weak signals or heat dissipation issues.
1. Make sure that the power is off when installing,
removing or examining the light bulb.
authority to operate the equipment.This device complies
with part 15 of the FCC Rules.Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and
receiver.
(3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio/TV
technician for help.
