16. Setting the left pedal
L mark - left pedal
Counterclock-wise
17. Brake adjustment
Nut А
Clamp
Nut В
Adjustment of V-shaped brakes:
If the distance between the brake shoe and the wheel disks is large enough, unscrew
the nut A, adjust the distance of the brake pad and tighten the nut A.
Rear brake adjustment:
Loosen nut B. Tighten (to increase braking force) or loosen (to reduce braking force)
the braking steel cable. Hold the steel cable in one position, tighten nut A.
When the goods are released from the factory, the bicycle brakes are already
adjusted. If you need to change the settings, we recommend contacting the
corresponding repair shops, it is not recommended to perform these settings by
yourself.
Brake Steel Cable
After completing all the assembly steps, the bicycle should look like this: (the name
of each part)
1. Rear wheel
2. The posterior cataphyte
3. Seat
4. Seat post clip
5. Frame protection panel
6. Protective panel for carrying out
the handlebar
7. Grips
8. Handlebar and stem
9. The brake handle
10. Brake cable
11. Front katafot
12. The front brake
13. Front Fork
14. Rear nut protection panel
15. Auxiliary wheels
16. Asterisk, connecting rods
17. The pedals
18. Chain protection
19. Boxing
20. Frame
21. Front nut guard
22. The front wheel
23. Wheel rim
09
10
