11
Do not touch the surface of the filter with your hands,
brush, or hard objects to avoid potential damage.
* Clean as required.
* Clean monthly.
* Clean as required.
* Clean after each use and replace every 3-6 months.
* Clean monthly.
* Clean monthly.
* Clean as required.
* Clean every 2 weeks and replace every 6-12 months.
Open the top cover of the robot and
take out the dustbin.
Open the water tank and fill it with
clean water.
Close the water tank and shake it
gently.
Pour out the remaining water as
shown.
Remove the VibraRise mop cloth
from the VibraRise mop bracket.
Clean the VibraRise mop cloth and
air-dry it.
ReactiveAI Obstacle Recognition
Wall Sensor
Mop Wash Sensor
Carpet Sensor
Cliff Sensors
Open the filter cover and remove
the filter.
Rinse the filter repeatedly and tap it
to remove as much dirt as possible.
Allow 24 hours for the filter to dry
thoroughly and reinstall it.
Open the dustbin cover and remove
the filter, then empty the dustbin.
Fill the dustbin with clean water and
close the cover. Gently shake the
dustbin, and then pour out the dirty
water.
Leave the dustbin and the washable
filter to dry.
Use a tool, such as a small
screwdriver, to pry out the axle and
take out the wheel.
The omni-directional wheel bracket cannot be removed.
Note:
C3-1—
Note:
If the robot will be left unused for a long period, turn it
off and charge it at least every three months to avoid battery
damage caused by over-discharge.
Clean the main wheels with a soft, dry cloth.
C5-2—
C5-1—
Note:
Note:
Purchase an additional filter and alternate if necessary.
C7-1—
C6-3—
Note:
To prevent blockage, only use clean water without any
cleaning liquid.
C5-3—
C5-4—
C6-2—
C6-1—
Basic Parameters
Robot
Note:
The serial number is on a sticker on the underside of
the robot.
< 6 hours
Charging Time
S270RR
Model
14.4V/5200mAh lithium-ion battery
Battery
Approx. 4.7kg (10.36 lbs.)
Weight
Rated Input
Charging Dock
14.4V/5200mAh lithium-ion battery
Charging Battery
CDZ11RR or CDZ12RR
Model
28W
Rated Power
100-240V~
Rated Input
20V 1.2A
Rated Output
50-60Hz
Rated Frequency
C8-1—
Note:
A dirty VibraRise mop will affect the mopping
performance. Clean it before use.
Use a soft, dry cloth to wipe and clean all
sensors, including:
C9-1—
C9-2—
C9-3—
C9-4—
C9-5—
Use a soft dry cloth to wipe the charging
contacts on the charging dock and the
robot.
Battery
The robot is equipped with a built-in
high-performance lithium-ion rechargeable
battery pack. To maintain battery
performance, keep the robot charged
during normal use.
C7-2—
C7-3—
20V 1.2A
C3
Omni-Directional Wheel
C4
Main Wheels
C7
Water Tank
C8
VibraRise Mop Cloth
C9
Robot Sensors
C10
Charging Contact Areas
C5
Dustbin
C6
Washable Filter
Rinse the wheel and the axle with
water to remove any hair and dirt.
Dry and reattach the wheel, pressing
it firmly in place.
C3-2—