background image

11. Maintenance and Storage

Cleaning and Storing Mini

 If you find any stains on the case of Mini, take a piece of soft cloth 

moistened with a little bit of water, and wipe the vehicle; if you spotted stains 

that are difficult to remove, you can use toothpaste and a toothbrush to clean 

spots on the Segway, and then wipe it clean with a damp cloth.

If you find scratches on parts made from plastic, you can use sandpaper or 

other abrasives to polish them.

Warning

: Do not use alcohol, petrol, kerosene or other corrosive solutions, 

volatile chemical solvents for cleaning, otherwise, it will cause serious 

damage to the case and can disrupt segway interior construction. 

Do not wash the Mini under the strong pressure of the water, even if the 

Segway is turned off. In addition, after charging of the vehicle, it is necessary 

to insert back the rubber cap, otherwise you may get an electric shock or in a 

result of flowing of water into this hole may cause serious damage.

If you do not use segway, store it in a cool, dry place, and do not leave it for 

long-term stay on the street. Leaving the device under the sun / in extremely 

high temperature / over-low temperature can cause rapid aging of the outer 

case and wheels of Mini or to reduce the battery life.

Maintaining Battery Mini

Do not store the battery of segway in rooms with the temperature, which 

exceeds 50С or   below  -20C (for example, do not leave the battery Mini and 

other batteries in cars in summer time under the scorching sun). 

Do not place the battery near the fire, because the consequences of such 

actions can deteriorate the battery , overheat and even a risk of fire. The 

other technical support information and precautions, see under the body of 

the device on the tech plate of the battery.

Avoid complete discharge of device, it will help extend the life of the battery. 

Furthermore, when using the device at room temperature, the battery is able 

to overcome a much greater distance and its performance will be better; 

but if you use a Segway at temperatures below 0C, performance and cross-

country of vehicle decreases. 

At -20C, distance traveled by segway will be smaller by half than in normal 

conditions or even less. But when the temperature rises, the distance 

traveled by the battery again will be the same, go to the App and check the 

remaining distance.

Note

: A fully charged segway lasts for about 120-180 days of standby time; 

not fully charged Segway lasts for about 30-60 days in standby. 

Therefore, if you did not promptly charged device excessively low charge 

may cause damage to segway. 

Such damage can not be restored. 

The battery has a smart chip that stores information about its charging-

discharging, so if you’re in for a long time not to recharge the Segway it can 

cause a serious damage to the device after which can not be recharged, 

thus, this type of damage is not included in the free warranty service . 

(

Warning

: Unauthorized persons are forbidden to disassemble the device, as 

there is a risk of electric shock or other serious injury due to a short circuit).

XIAOMI-MI.COM

Summary of Contents for Ninebot Mini



















Reviews: