5
Weighting and Measuring Body Fat
Place the scale on a hard, flat floor.
Step barefoot onto the scale as shown in the figure. Make sure the skin of your feet makes
good contact with the four metal electrodes on the scale.
After your weight is measured, the scale will begin calculating your body composition. The
process is completed when the status bar below the indicated weight starts blinking. You can
then view your body composition results on your phone.
The body composition data provided by this scale is provided by this scale is for reference
only and does not constitute as medical advice.
Weighing Items
Place the scale on a hard, flat surface. Press on the scale to turn it on. Wait until "0.00" is
displayed and place the item you want to weigh onto the scale. Moving or bumping the scale
may affect the accuracy, in which case you should weigh the item again to make sure the
measurement is accurate.
Alert Indications
When weighting, a blinking "L" indicates a
low battery level, and you should replace
the batteries as soon as possible.
When weighing, a blinking "OL" indicates
the scale is overloaded beyond its maximum
capacity of 150 kg.
