5. Improper disposal of used batteries can seriously pollute the environment. Observe local regulations when disposing of this
battery pack. Do not discard this battery pack at will, to protect the natural environment.
6. Fully charge after every use, in order to extend its battery life.
Do not place the battery in an environment where the ambient temperature is higher than 50°C or lower than -20°C (e.g., do not
leave the scooter or the battery pack in a car under direct sunlight for an extended time). Do not throw the battery pack into fire
as it may lead to battery failure, battery overheating, and even another fire. If the scooter is expected to be left idle for more than
30 days, please fully charge the battery and place it in a dry and cool place. Keep in mind to recharge it every 60 days to protect
the battery from potential damage which is beyond limited warranty.
The scooter shall be only be used with original batteries and charging of the Scooter shall only be done by the original charging
adapter supplied with the scooter (or any battery model or charging adapter model approved by the manufacturer as
compatible).
Always charge before exhausting the battery to prolong the battery's lifespan. The battery pack performs better at normal
temperature, and poor when it is below 0°C. For instance, when it is below -20°C, the riding range is only half or less at normal
state. When the temperature rises, the riding range restores. For detailed information, please refer to Mi Home / Xiaomi Home
App.
The external flexible cable of this transformer cannot be replaced; If the supply cord is damaged, it must be replaced by a special
cord or assembly available from the manufacturer or its service agent. Should you have questions, you can contact Xiaomi's
customer service available at www.mi.com.
Note: fully charged scooter will last for 120-180 days. The built-in intelligent chip will keep a log of its charging and discharging
records. The damage caused by prolonged no charge is irreversible and is beyond limited warranty. Once the damage is done,
the battery cannot be recharged (non-professionals are forbidden to dismantle the battery pack, as it may cause electric shock,
short circuit or even major safety accidents).
In case of accident, blockage or breakdown, do not try to repair by yourself and contact an authorized repairer if the product is
still under guarantee. If not, you can contact any specialized repairer of your choice. You can ask for the list of the authorized
repairers to the customer service available at www.mi.com. For any question, please contact Xiaomi's customer service available
at www.mi.com.
Efforts have been made to simplify wording in the user material for users. When an action appears too complicated for a user, he
is advised to contact an authorized or a specialized repairer or Xiaomi's customer service.
WARNING ! As with any mechanical component, a vehicle is subject to high stresses and wear.
The various materials and components may react differently to wear or fatigue. If the expected service life for a component has
been exceeded, it may break suddenly, therefore risking causing injuries to the user. Cracks, scratches and discoloration in the
areas subject to high stresses indicate that the component has exceeded its service life and please contact an authorized or a
specialized repaired or Xiaomi's customer service.
Adjust the handlebar
Long-term use of the scooter may result in loose screws, causing the handlebar stem to get unstable. If you notice the handlebar
stem gets shaky when riding, follow the steps below.
Tools:
I: 8-10 mm wrench
II: 4 mm Allen key
Note: These tools are to be prepared by the user.
Steps:
1. When in the folded state, use tool I to loosen "c" (clockwise).
2. Use tool I to loosen "b" (clockwise).
3. Use tool II to adjust "a" (clockwise) to the appropriate position, and use tool I to tighten "b" (counterclockwise).
4. Fold the handlebar stem up, close the quick release lever and turn the handlebar stem clockwise to close the safety hook.
5. Shake the handlebar stem to see if the problem has been resolved.
If not, repeat step 2 and 3.
If it has, continue to step 6.
6. Return the scooter to the folded state and use tool I to tighten "c" (counterclockwise).
* Step 6 is mandatory.
a. Inner Hex Nut
b. Hex Stud
c. Hex Nut
Before adjustment, make sure the scooter is powered off and not charging.
