3. Installing and Disassembling the Propeller Guard
Installing:
Line up the protruding points on the propeller guard with the sunken grooves
on the drone and insert them together. Tightly press both sides of the propeller guard
into place a
ft
er the sunken grooves and protruding points have completely interlocked.
Disassembling:
Lightly pull on the clip on one of the ends of the propeller guard outwards
until the propeller guard has separated from the inside of the drone, at which point the
propeller guard can be fully removed.
Alignment of the protruding points of the propeller
guard with the sunken grooves on the propeller guard
Sunken grooves on
the propeller guard
7
Summary of Contents for Mi Drone mini
Page 55: ...纸张 105g京东太空梭 成品尺寸 115 115mm 公差正负0 5mm 文字 线条为专色潘通冷灰11C 潘通1505C 骑马钉 共68P ...
Page 56: ......
Page 57: ......
