Connecting
Turning Mi Bunny Speaker on
Press and hold a button (1) for 2 seconds, until you hear corresponding beep.
Mi Bunny Speaker automatically turns on Bluetooth mode of devices detection.
Connecting to other devices
Open Bluetooth settings, select «Mi Bunny Speaker» in a list of available devices.
After successful combination of appropriate devices you can hear a beep signal. Indicator
will light up blue.
With further use turn on Bluetooth on Mi Bunny Speaker and device automatically
connects to it.
Frequently used functions
Play music via Bluetooth
Pairing of smartphone and Mi Bunny Speaker: smartphone operating as a control panel
and Mi Bunny Speaker is a speaker.
Play music from SD card
After inserting a card, press Play button to play files, stored on Micro SD.
* Support Micro SD 32GB or more.
* Upload tracks to SD card via USB cable.
Notes
Charging
During charging a power indicator flickers green. Permanent Red light indicates a full
charge of the device.
* During charging there is a certain limit of playback volume.
Specifications
Maximum output power: 2.8 W x 1 (4 ohms, THD <1%);
Speaker diameter. 45 mm, 1 driver;
Bluetooth Edition: 4.0;
Frequency: 150 Hz - 20 kHz;
Battery capacity / Voltage: 650 mAh 3.7 V;
The duration of battery life: 3 hours (60 dB / 1m);
Power Consumption USB: 5 V, 500 mA;
Size (length x width x height): 80 x 74 x 136 mm;
Operating temperature 0 ° C - 45 ° C.
