Connecting
●
Connecting the earphones to a new device
1. Place the earphones into the charging case, and press and hold the function button for
two seconds when the charging case's lid is opened. The indicator will start blinking
white to indicate that the earphones are awaiting a connection. If the earphones are not
connected for 1 minute, they will enter sleep mode and the indicator will turn off.
2. Enable the device's Bluetooth, then locate and connect to "Xiaomi Buds 3T Pro". If a
passcode is requested, enter "0000".
Note: Before using the earphones for the first time, please place them into the charging
case and press and hold the function button for 5 seconds to activate them. Once
activated, the earphones will automatically enter the awaiting connection state.
●
Connecting the earphones with a Xiaomi/Redmi phone
Place the earphones into the charging case and close its lid. Make sure the Bluetooth
function is enabled on your Xiaomi/Redmi phone. Hold your phone close to the charging
case, then open the case's lid. Follow the on-screen instructions of the phone to connect
to the earphones.
Note: The feature of quick connection is currently only supported by some Xiaomi/Redmi
phone, please update your Xiaomi/Redmi phone to the latest stable version.
●
Connection interrupted
If the device's Bluetooth is disabled, or the earphones are too far to connect with the
device, the Bluetooth will be disconnected, and the earphones will make a disconnection
notification sound and automatically enter the awaiting connection mode. The earphones
will enter the passive connection mode after remaining disconnected for 5 minutes and
enter the sleep mode after 10 minutes. Wearing the earphones again will wake them up
and they will enter the awaiting connection mode.
Note: Passive connection means that the earphones cannot actively connect to the device,
and users need to enter the device's Bluetooth page and manually tap the earphones'
Bluetooth name to connect. (The earphones and the device have connection history.)
●
Automatic connection
When the earphones are in the charging case, opening the lid of the charging case will
automatically connect the earphones to the most recently used Bluetooth device. If no
connection history is detected, or if the earphones cannot successfully connect to any
Bluetooth device, the earphones will automatically enter the awaiting connection mode.
Note: If the earphones cannot automatically connect to a device, you will need to
manually connect the earphones to the desired device via the device's Bluetooth settings.
●
Clearing connection history
1. Place the earphones into the charging case.
2. Press and hold the charging case's function button for at least 10 seconds, and release
it once the indicator stays white.
The earphones have been reset, and the old connection history has been cleared. The
charging case's indicator blinks white, and the earphones are in pairing mode again.
Due to the connection characteristics of the Bluetooth signal, in dense environments with
2.4 GHz electromagnetic signal interferences, there may be occasional disconnects or no
sound.
05
