Xiamen Smarttek PCT503-W Quick Start Manual Download Page 9

9

 

 

5.

 

Safety Notice 

This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against 

harmful interference in a residential installation. This equipment 

generates, uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause 

harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. 

If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures: 

 

- Reorient or relocate the receiving antenna. 

- Increase the separation between the equipment and receiver. 

-  Connect  the  equipment  into  an  outlet  on  a  circuit  different  from 

that to which the receiver is connected. 

- Consult the dealer or an experienced radio/TV technician for help 

 

Changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to 

operate the equipment. This device complies with Part 15 of the FCC 

Rules. Operation is subject to the following two conditions: 

 

- This device may not cause harmful interference, and 

- This device must accept any interference received, including 

interference that may cause undesired operation. 

 

 RF Exposure Warning Statements:

  This equipment complies with FCC radiation exposure limits set forth 

 for an uncontrolled environment. This equipment shall be installed and 

 operated with minimum distance 20cm  between the radiator & body. 

 

 

 

 

 

 

Summary of Contents for PCT503-W





















Reviews: