Antai Solar Mounting Rack Compliance to AS Code 1170
9
12. Place the solar module on the
rails, slide the end clamp tightly
against the solar module and
fasten tightly using the Allen bolt.
13. Cross-section through the end
clamp when installation step12
has been correctly performed.
14. Slide the pre-assembled inter
clamp into the rails from above,
place it firmly against the module
and fasten loosely.
15. Now slide the next module
against the previously installed
module and tighten the inter clamp
using the Allen key, Take care that
the anti slip protection sits in the rail
channel of the lowest row of rails.
