XHDATA D-808, User Manual, Page: 8 / 18

8
Functions and Operation
Power and charging
Power On Button and Sleep Timer
In this manual, the terms “ press ” and “ long press ” are used. Press means to press
the button briefly. Long press means to press the button and hold it for 2 seconds.
The orange power on button turns the radio on. For 5 seconds, the sleep timer icon
appears on the display flashing. While the sleep timer icon is flashing, further press-
es of the Power button increment through a list of sleep times from 120 to 15
minutes or
“ on ” indicating the timer is disabled. When the sleep timer is set, the
radio will automatically power off after the selected number of minutes. The radio
cannot be turned off while the sleep timer icon is flashing —
just wait until it stops.
The sleep timer setting can be disabled by simply turning the radio off.
Alarms
The radio can automatically power on based on the alarm setting. Alarm mode can
be set on or off with the ALARM button.
To turn the alarm on or off, turn off the radio and press the ALARM button. Use the
up arrow button to toggle through the three alarm modes: Wake to radio, wake to
tone and off. The alarm mode is indicated on the display with a tiny speaker symbol
to the right of the word
“ Timer ” for wake to radio, a tiny bell to indicate wake to
tone, or no symbol when the alarm is off. Alarm to radio uses the most recently
tuned station.
To set the alarm time, long - press the ALARM button and key in the time with the
number buttons. For example, to set the alarm for 21:30, long press the ALARM
button and key 2 1 3 0. The alarm is set at the factory for 7:00 AM, turned off. The
radio does not support a 12
- hour clock.