station played. It is best to check the station frequency and adjust the
volume level to your wake up preference before going to sleep to ensure
that it is to your liking. When the alarm sounds, press the power button to
turn the alarm off, or press any other button to sleep for 10 more minutes.
FM Band I FM Set Button
·
With the radio off, press and hold FM button to select FM frequency band
as 87 - 108MHz; 64-108MHz according to different countries.
·
With the radio on, press quickly to tune in FM band; press and hold for 2
seconds to activate ATS (Auto Tuning System) function.
LW / MW Button
·
When the radio is powered off, press and hold for 2 seconds to turn on or
off LW.
With the radio on, quickly press to switch between LW and MW band;
press and hold for 2 seconds to activate ATS and scan the entire LW or
MW band.
SW / Meter Button
·
With the radio on, quickly press to start SW band and select meter band
and change between frequencies according to popular meter bands.
·
Press and hold SW band for 2 seconds to activate ATS feature.
·
With shortwave you can listen to radio signals from around the world.
Signals are usually received best at night and early morning when the
earth's ionosphere does not cause interference with the bouncing signals.
This radio has several bandwidth filters to reduce interference.
Select which one sounds best by pressing the 'BANDWIDTH' button after
a station is tuned in.
AIR Button
·
With the radio on, quickly press this button to activate AIR band, press
and hold for 2 seconds to start ATS to scan the entire Air bands. Once the
station is available, it will stop scanning to play this station.
LIGHT Button
·
Quickly press this button to turn on the backlight of the LCD display, the
backlight will be on all the time. Quick press again to turn off the light.
Activate 9/10kHzTuning Button
·
When in 9k mode, the frequency range is 522-1620kHz, intelligent step is
1kHz / 9kHz (for Asia, Africa and Europe)
When in 10k mode, the frequency range is 520-1710kHz, intelligent step
is 1kHz / 10kHz (for North America)
Frequency Button
·
When you are in your selected band, this button lets you directly enter
the frequency number of your desired station using the number buttons.
For example, to play 1520kHz in the AM band, quickly press the FREQ
button and then enter 1,5, 2, 0 using the number buttons.
NOTE:
When manually entering SW frequencies
1711
to
29999
, you
should press the FREQ button first. After entry, if entry is incorrect, the
LCD will display ‘Error’…
Memory Preset Button D-9
·
Save your favorite stations to memory buttons. To save a station, press
and hold any memory button for 2 seconds while the station is playing.
The radio is a "smart" radio and will remember current settings when a
station is preset into memory. The current settings that will be saved with
