Figure 8-3
Wearing an ESD wrist strap
●
Exercise caution when using tools that could cause personal injury.
●
If the installation position of a device is higher than the shoulders of the
installation personnel, use a vehicle such as a lift to facilitate installation. Prevent
the device from falling down and causing personal injury or damage to the
device.
●
The equipment is powered by high-voltage power sources. Direct or indirect
contact (especially through damp objects) with high-voltage power sources may
result in serious injury or death.
●
Ground a device before powering it on. Otherwise, high voltage leakage current
may cause personal injury.
●
When a ladder is used, ensure that another person holds the ladder steady to
prevent accidents.
●
Do not look into optical ports without eye protection when installing, testing, or
replacing optical cables.
Equipment Safety
●
Use the recommended power cables at all times.
●
Power cables are used only for dedicated servers. Do not use them for other
devices.
●
Before operating equipment, wear ESD clothes and gloves to prevent
electrostatic-sensitive devices from being damaged by ESD.
●
When moving a device, hold the bottom of the device. Do not hold the handles of
the installed modules, such as the PSUs, fan modules, drives, and the
mainboard. Handle the equipment with care.
●
Exercise caution when using tools that could cause damage to devices.
●
Connect the primary and secondary power cables to different power distribution
units (PDUs) to ensure reliable system operation.
●
Ground a device before powering it on. Otherwise, high voltage leakage current
may cause device damage.
Transportation Precautions
Improper transportation may damage equipment. Contact the manufacturer for
precautions before attempting transportation.
Transportation precautions include but are not limited to:
●
The logistics company engaged to transport the device must be reliable and
comply with international standards for transporting electronics. Ensure that the
FusionServer 2488H V7 Server
Technical White Paper
8 Safety Instructions
Issue 01 (2023-09-01)
Copyright © xFusion Digital Technologies Co., Ltd.
65
