XPro - Operation Manual
29
Sleep Mode
To preserve battery life, the Meter automatically turns
off if you do not turn the rotary switch or press any
button for approximately 15 minutes.
To activate the Meter, press the
POWER
Button two
times.
Operation of Hold Mode
To use the Hold Mode, perform the following steps:
1. Press the
Hold
Button to enter the Hold Mode.
2. Press the
Hold
Button again to exit the Hold
Mode.
3. While in Hold Mode,
H
is displayed.
!
WARNING:
To avoid the possibility of electrical
shock, do not use the Hold Mode to determine if
circuits are without power. The Hold Mode will not
capture unstable or noisy readings.