XFtp TPNA-1000, Manual

Page: 13 / 24

1.13
TPNA-1000 - Section I: The Basics
Now that you have your TPNA-1000 out of its box, take a few moments to look it over and become
familiar with its controls.
Overview
The thin protective film layer used to protect the display during
shipping should be removed.
Your TPNA-1000’s battery may need to be charged. See the
Battery Charging Section later in this chapter.
3. Getting to Know Your TPNA-1000
Chapter 3
1
2
3
4
5
6
7
8
Front View
1. RF Input Port - F type input for 5 to 1000
MHz input signal. The F type input connector
is field replaceable.
2. Display Screen - Used to display menus
and signal measurements.
3. Function Buttons - These are used to
access the soft key that is shown on the
Display Screen directly above the button.
4. POWER Button - This button is used to
power the unit on and off.
5. Power Indicator - This LED will illuminate
when the unit is connected to a powered
battery charger.
6. Scroll Wheel - Scroll the wheel to to
highlight functions and adjust channels, then
press the scroll wheel to confirm selections
and enter measurement modes.
7. Short Cut Buttons - Use these buttons to
quickly navigate through the functions and
menus.
8. Keypad - These buttons are used to enter
alphanumeric characters.