Controls
5
INPUTS (RCA)
These inputs are connectd to the source unit’s outputs.
6
GAIN
This control is used to match the amplifier’s input sensitivity to the source unit’s output.
7
X-OVER SWITCH
This switch is used to select the filter for the respective amplifier channels, Low Pass (LP)/Band
Pass (BP), Fullrange (FULL) or High Pass (HP).
8
HIGH PASS FREQ.
This control is used to set the High Pass filter frequency for the speaker outputs.
9
LOW PASS FREQ.
This control is used to set the Low Pass filter frequency for the speaker outputs.
10
XTREME BOOST.
This control is used to give a boost to your bass. Take care while adjusting this knob we do not call
it XTREME BASS for nothing!
11
POWER & PROTECTION LEDS
The Power LED shows if the amplifier is ON (LED is white-lit), the protection LED
shows if the amplifier is in protection (LED is red-lit).
E series
LIFE AMPLIFIED
