16
Assembly and installation guide:
cleaning xSense Pro
1 - remove and clean the filter located at the
end of the cone
2 - clean the water inlet hole at the base of
the cone
3 - Open xSense by pressing counterclockwise
on the collector cone and clean the rain gauge
spoon.
4 - Close xSense by pressing the manifold
cone clockwise and screwing the rain gauge
filter back down.
It may happen that the rain gauge returns abnormal data, in which case
one possible cause is dirt and debris in the cone or on the rain gauge which
is located under the collector cone.
To clean it, therefore, proceed as follows:
Cleaning xSense Pro
