12
TV key: standby status, press TV button to enter the analog television
interface;
On / off button: On / off, click this button at any interface out to the
idle screen;
The arrow keys: the default music player functionality into the
interface;
Under the direction of key: the default interface to enter the alarm
settings;
Left arrow key: the default settings into the ring layout;
Right arrow key: the default settings into the situation model
interface;
Dialing keys: used to answer the phone and call, and you can view
the call records.
Note
：
¾
The manual called this action by pressing a button, the button is
pressed immediately after the release; long press of a button, the
button is pressed and hold at least 1 second and release.
2.3.
Input
The mobile phones with built-in input methods, so you can lower the
number of keys, find and enter the relevant text:
3.
MAKE AND RECEIVE CALLS
Phone set is complete, you can make and receive calls, and this section
will give you all the basic information needed.
Note
：
¾
When using the headset, tap plug light pull, so as not to damage
the headphone jack.
3.1.
The phone on / off
Phone Power
You can press and switch machine key to open the phone. If asked
to enter PIN code, see the front of the section described.
Phone off
In standby mode press and switch machine key to power off the
phone.
3.2.
Call
When the network operator's text appears in the display, or go into
standby screen, then you can make or receive calls. If you insert the two
SIM cards, two operators of the text, will appear in the display.
Display the upper left corner of the image were marked to the
current dual-card network signal strength (at least when cells expressed
the strongest network signal).
The impact of voice quality by the relatively large obstacles, so the
movement in a small area can effectively improve the signal strength.
Call from the idle screen in two ways: direct dial, phone book
dialing.
3.2.1.
Direct Dial
Standby interface press the right software to access the phonebook
or press any number key to enter dial-up interface.
Domestic telephone calls
Enter the phone number using the keyboard (if it is a domestic long
distance, please add area code), then click card 1 or card 2 to start the
call.
Note
：
¾
When using a single card standby mode, click the card 1 and card 2
to correspond to the current dial-up card
