XEROX CARD SCANNER 200 SCANNER VPAT 9
following: The position of
any operable control shall
be determined with respect
to a vertical plane, which is
48 inches in length,
centered on the operable
control, and at the
maximum protrusion of the
product within the 48 inch
length on products which
are freestanding, non-
portable, and intended to
be used in one location and
which have operable
controls.
(j)(2) Products which are
freestanding, non-portable,
and intended to be used in
one location and which
have operable controls
shall comply with the
following: Where any
operable control is 10
inches or less behind the
reference plane, the height
shall be 54 inches
maximum and 15 inches
minimum above the floor.
Supported
(j)(3) Products which are
freestanding, non-portable,
and intended to be used in
one location and which
have operable controls
shall comply with the
following: Where any
operable control is more
than 10 inches and not
more than 24 inches
behind the reference plane,
the height shall be 46
inches maximum and 15
inches minimum above the
floor.
Supported
(j)(4) Products which are
freestanding, non-portable,
and intended to be used in
Supported