Xerox XC811, Manual

Page: 5 / 53

iii
Safety Notes
Your copier and supplies have been designed and tested to meet strict
safety requirements. These include safety agency examination and
approval, and compliance to established environmental standards. Please
read the following instructions carefully before operating your copier and
refer to them as needed to ensure the continued safe operation of your
copier.
•
FOLLOW all warnings and instructions marked on or supplied with the
product.
•
SYMBOLOGY: = High Voltage, = Heated Surface.
•
UNPLUG this copier from the wall outlet before cleaning. Always use
materials specifically designated for this copier. Use of other materials
may result in poor performance and could create a hazardous situation.
•
DO NOT use aerosol cleaners. Follow the instructions in this User
Guide for proper cleaning methods.
•
NEVER use supplies or cleaning materials for purposes other than
what they were intended. Keep all supplies and materials out of reach
of children.
•
DO NOT use this copier near water, wet locations, or outdoors.
•
DO NOT place this copier on an unstable cart, stand, or table. The
copier may fall, causing personal injury or serious damage to the
copier.
•
YOUR COPIER is equipped with a 3-wire grounding-type plug (i.e., a
plug having a third grounding pin). This plug will only fit into a
grounding-type power outlet. This is a safety feature. To avoid risk of
electric shock, contact your electrician to replace the receptacle if you
are unable to insert the plug into the outlet. Never use a ground
adapter plug to connect the copier to a power source receptacle that
lacks a ground connection terminal.
•
YOUR COPIER should be operated from the type of power source
indicated on the marking label. If you are not sure of the type of power
available, consult your local power company.
Required by IEC-950 (EN 60 950) Europe:
The equipment should be installed near an accessible socket outlet
for easy disconnection.