4
WorkCentre
®
Pro 165/175
WorkCentre
®
Pro 165/175 Advanced Multifunction Systems
SNMP Version 1 and SNMP Version 2c trap over TCP/IP and IPX
MIB access (IETF-MIB II RFC 1213), host resources
MIB RFC 2790, Printer MIB RFC v.2
Allows simple remote installation setting of configuration options and management of the device
A Web-based server application for network administrators that permits Web browser-based
device management from any workstation, whether running Windows, UNIX or any other operating system.
Works with any SNMP-managed printer from any manufacturer.
Provides help with device discovery and installation, health checks and troubleshooting, and device upgrades,
as well as basic accounting and asset management.
Requires Windows XP or 2000 (Professional or Advanced Server) and Internet Explorer 5.01 and higher
Server gateway application: centralized management tool.
Provides added identification to the general discovery performed by Unicenter TNG and the ability to
see the WorkCentre Pro under a Unicenter TNG Business Process View.
Provides for the identification of Xerox N-Series printers and WorkCentre Pro multifunction devices
in the general discovery performed by Tivoli NetView.
CentreWare MC Snap-in supports printer discovery and management via a Microsoft Management Console (MMC)
link to an embedded Web Server in NT and Windows 2000 environments.
Provides for the identification of Xerox N-Series printers and WorkCentre Pro multifunction devices in the general
discovery performed by HP OpenView.
Provides traps and message updates to the OpenView alarm browser and the ability to launch CentreWare Internet
Services for device management directly from OpenView.
Plug and Print 2000 (PnP2000) is an administrative service program that simplifies enterprise-wide printer installs
and relocations for Windows 2000 environments. The product discovers devices, automatically installs devices,
enables sharing printers to users and provides install reports—all through a user-friendly interface.
Enables intelligent PostScript printing on Xerox multifunction printers by storing Xerox software as well as the barcode
fonts on the printer hard disk. Enables the printing of barcodes from any application (client or mainframe) that supports
PostScript printing. Automatically calculates the check digit, places start/stop and middle bar characters in the data string,
compresses and encodes the data string, and rotates the barcode through 90 or 270 degrees.
Simplifies printing in SAP R/3 environments by providing users of SAP R/3 v4.6C, 4.x and 3.x ERP applications with
enhanced WorkCentre Pro printing functionality. (PostScript and PCL):
—Simplex or duplex printing
—Finishing—single or dual stapling
—Tray pull location from any tray
—Print security via PIN ID capability at the WorkCentre Pro
Provides built-in process intelligence that allows the printing of barcodes on any appropriately configured PostScript
printer on the SAP R/3 4.x (or higher) network. Used in conjunction with Xerox PostScript Device Types for SAP R/3
Environment and Xerox Font Center Barcode Fonts. Utility enables automated checksum calculation, placement of
start/stop characters, encoding of data string, and data compression.
DEVICE MANAGEMENT
Management Support
Xerox CentreWare
®
Internet Services
Xerox CentreWare
®
Web
Novell NDPS/NEPS
(gateway for WorkCentre Pro)
Xerox CentreWare
®
for Unicenter TNG
®
Xerox CentreWare
®
for Tivoli
®
NetView
®
Xerox CentreWare
®
MC
for Microsoft Management
Console (MMC)
Xerox CentreWare
®
for HP
®
OpenView
®
Xerox Plug and
Print 2000
Xerox Barcode Pro PS
(optional)
Purchase via
www.font.net
Xerox Device Types for
SAP R/3 Environment
Xerox SAP R/3 Intelligent
Barcode Utility (optional)
Purchase via www.font.net
