Scanning
144
Xerox
®
WorkCentre
®
6655/6655i Color Multifunction Printer
User Guide
Building a Scan Job
Use this feature to combine an assorted group of originals for assembly into a single scan job.
To build a scan job:
1.
Press the
Services Home
button, then touch
Workflow Scanning
.
2.
Touch the
Job Assembly
tab, then touch
Build Job
>
On
.
3.
Touch
Options
.
a.
Select or clear the
Display summary window between segments
check box.
b.
Select or clear the
Turn Build Job Off after Job is Submitted
check box.
c.
Touch
OK
.
4.
Program and scan the first segment:
a.
Load the originals for the first segment.
b.
Press the green
Start
button on the control panel.
Note:
If a password is required, contact the system administrator.
5.
Program and scan additional segments:
a.
Load the originals for the next segment.
b.
When the Build Job screen appears, touch
Program Next Segment
.
c.
Press the green
Start
button to scan the originals for that segment.
6.
Repeat the previous step for each remaining segment.
Note:
At any time, you can touch
Delete All Segments
to modify the job.
7.
Program and scan all segments, then touch
Submit Job
. The Job Progress screen appears, and the
individual segments are scanned as a single job.
Note:
If necessary, touch
Delete
>
Delete Job
to cancel the job.
