Xerox WorkCentre 6400V/S, User Manual

Page: 53 / 248

Printing
WorkCentre 6400 Multifunction Printer
User Guide
53
Printing on Special Media
This section includes:
•
Printing on Transparencies on page 53
• Printing on Envelopes on page 54
• Printing on Labels on page 54
• Printing on Glossy Paper on page 55
• Printing on Custom Size Paper on page 55
Printing on Transparencies
Transparencies can only be printed from Tray 1. For best results, use only recommended Xerox
transparencies.
To order paper, transparencies, or other specialty media, contact your local reseller or go to
www.xerox.com/office/WC6400supplies .
Caution: Damage caused by using unsupported paper, transparencies, or other specialty media is
not covered by the Xerox warranty, service agreement, or Total Satisfaction Guarantee. The Total
Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside
these areas; please contact your local representative for details.
See also:
www.xerox.com/paper Recommended Media List (United States)
www.xerox.com/europaper Recommended Media List (Europe)
Guidelines
• Remove all paper before loading transparencies in the tray (Tray 1 only).
• Handle transparencies by the edges using both hands. Fingerprints or creases can cause poor print
quality.
• Do not load more than 20 transparencies in Tray 1. Overloading the tray can cause the printer to
jam.
• Do not use transparencies with stripes on the side.
• Do not fan transparencies.
• After loading transparencies, change the paper type at the printer’s control panel.
• In the printer driver, select either Transparency as the paper type or Tray 1 as the paper source.