Installation and Setup
36
Xerox
®
WorkCentre
®
6027 Multifunction Printer
User Guide
Connecting to a Wireless Network
You can connect to a wireless network using the
Software and Documentation disc
included with your
printer or from the printer control panel.
Notes:
•
You can connect using the 3-click connection method one time on the first installation attempt
only.
•
WPA2 Enterprise networks are not supported.
•
The 3-click connection method is supported for Windows 7 and later only.
Connecting with 3-Click Connection
1.
Insert the
Software and Documentation disc
into the appropriate drive on your computer.
If the installer does not start automatically, navigate to the drive, and double-click the
Setup.exe
installer file.
2.
Click
Setup Printer and Install Software
.
3.
At the License Agreement, select
I Agree
, then click
Next
.
4.
On the Select a Connection Method screen, click
Wireless
. If a wireless connection is established, the
Xerox Printer Found screen appears.
5.
To connect to the wireless network, click
Next
, or click
Connect to a different wireless network
.
6.
To complete the installation, click
Finish
.
Note:
If a connection is not established, select
Search for Networks
or
WPS
. For details, see
Searching
for Networks
on page 37 or
Connecting Using WPS
on page 36.
Connecting Using Wi-Fi Protected Setup (WPS)
1.
Insert the
Software and Documentation disc
into the appropriate drive on your computer.
If the installer does not start automatically, navigate to the drive, and double-click the
Setup.exe
installer file.
2.
Click
Setup Printer and Install Software
.
3.
At the License Agreement, select
I Agree
, then click
Next
.
4.
On the Select a Connection Method screen, click
Wireless
.
5.
Click
WPS
.
6.
At the prompt, press and hold the WPS button on the printer for two seconds.
7.
After you press the WPS button on the printer, within two minutes, press and hold the WPS button
on your wireless router for two seconds.
8.
After you press both buttons, click
Next
.
