![background image](http://html.mh-extra.com/html/xerox/workcentre-5019/workcentre-5019_service-documentation_884268025.webp)
08/2012
2-14
WorkCentre 5021/5019
005-131/132, 005-135
Initial Issue
Status Indicator RAPs
•
The surface of the Out Roll for foreign substances.
•
The surface of the Out Roll for wear.
•
The DADF Invert Sensor (Input Check [005-211]) for operation failure. (
PL 56.10
)
•
The DADF Regi Sensor (Input Check [005-110]) for operation failure. (
PL 56.14
)
•
The DADF Feed Motor (Output Check [005-008]) for operation failure. (
PL 56.6
)
•
The Drive Gear for wear and damage.
If no problem is found, replace the DADF PWB. (
PL 56.2
)
005-134/139 DADF Invert Sensor Off Jam on Inverting/
DADF Invert Sensor Off Jam
BSD-ON:
CH5.5
,
CH5.4
[DADF Invert Sensor Off Jam on Inverting]
During the Invert operation where there is a next document, after the DADF Regi Sensor
turned OFF, the DADF Invert Sensor did not turn OFF within the specified time.
[DADF Invert Sensor Off Jam]
During the Simplex and Duplex Scan operation, after the DADF Regi Sensor turned OFF, the
DADF Invert Sensor did not turn OFF within the specified time.
Cause/Action
Check the following:
•
Transportation failure due to foreign substance on the document path.
•
The surface of the Out Roll and Exit Roll for foreign substances.
•
The surface of the Out Roll and Exit Roll for wear.
•
The DADF Invert Sensor (Input Check [005-211]) for operation failure. (
PL 56.10
)
•
The DADF Regi Sensor (Input Check [005-110]) for operation failure. (
PL 56.14
)
•
The DADF Feed Motor (Output Check [005-008]) for operation failure. (
PL 56.6
)
•
The Exit Pinch Roll for operation failure (including for the operation failure of the Exit Nip
Release Solenoid (Output Check [005-072])). (
PL 56.7
)
•
The Drive Gear for wear and damage.
If no problem is found, replace the DADF PWB. (
PL 56.2
)
005-135 DADF Side 2 Pre Regi Sensor On Jam
BSD-ON:
CH5.4
,
CH5.5
After the DADF Feed Motor started the reverse rotation at Invert operation, the DADF Pre Regi
Sensor did not turn ON within the specified time.
Cause/Action
Check the following:
•
Transportation failure due to foreign substance on the document path.
•
The surface of the Exit Roll for foreign substances.
•
The surface of the Exit Roll for wear
•
The DADF Pre Regi Sensor (Input Check [005-206]) for operation failure. (
PL 56.14
)
•
The DADF Feed Motor (Output Check [005-048]) for operation failure. (
PL 56.6
)
•
The Exit Pinch Roll for operation failure (including for the operation failure of the Exit Nip
Release Solenoid (Output Check [005-072])). (
PL 56.7
)
•
The Drive Gear for wear and damage.
If no problem is found, replace the DADF PWB. (
PL 56.2
)
005-136 DADF Side 2 Regi Sensor On Jam
BSD-ON:
CH5.5
,
CH5.4
After the DADF Pre Regi Sensor turned ON at Invert operation, the DADF Regi Sensor did not
turn ON within the specified time.
Cause/Action
Check the following:
•
Transportation failure due to foreign substance on the document path.
•
The surface of the Exit Roll, Takeaway Roll, and Regi Roll for foreign substances.
•
The surface of the Exit Roll, Takeaway Roll, and Regi Roll for wear.
•
The DADF Regi Sensor (Input Check [005-110]) for operation failure. (
PL 56.14
)
•
The DADF Pre Regi Sensor (Input Check [005-206]) for operation failure. (
PL 56.14
)
•
The DADF Feed Motor (Output Check [005-008]) for operation failure. (
PL 56.6
)
•
The DADF T/A Clutch (Output Check [005-098]) for operation failure. (
PL 56.7
)
•
The Exit Pinch Roll for operation failure (including for the operation failure of the Exit Nip
Release Solenoid (Output Check [005-072])). (
PL 56.7
)
•
The Drive Gear for wear and damage.
If no problem is found, replace the DADF PWB. (
PL 56.2
)
Summary of Contents for WorkCentre 5019
