dc08cc0440
Customer Support
Page 21
Feature
Implementation
Values
Stapling
(w/ finisher)
<</Staple
int1
/StapleDetails << /Type 7
/Location
int2
>>
>>
setpagedevice
Where
int1
is one of the following:
0* = Do not staple
3 = Staple at the end of each set
Where
int2
is one of the following:
0* = top-left-single
1 = bottom-left-single
2 = top-right-single
3 = bottom-right-single
4 = top-double
5 = bottom-double
6 = left-double
7 = right-double
Punch
(w/ fnisher)
<</Punch
int1
/PunchDetails << /Type 5
/Position
int2
/Numholes
int3
>>
>>
setpagedevice
Where
int1
is one of the following:
0* = Do not punch
3 = Do punch by set unit.
Where
int2
is one of the following:
0 = topside
1 = bottom side
2 = left side
3 = right side
Where
int3
is one of the following:
2 = 2 holes
3 = 3 holes
4 = 4 holes
Booklet
(w/ finisher
and booklet
module)
<</Booklet
value1
/BookletDetails << /Type 3
/StapleType
int
/PrintInside
value2
/PageSet
value3
>>
>>
setpagedevice
Where
value1
is one of the following:
true = Do Booklet.
false* = Do not Booklet.
Where
int
is one of the following:
0* = Do not file on inside.
1 = File on inside.
Where
value2
is one of the following:
true* = Print on inside.
false = Print on outside.
This feature is effective only in conjunction
with that StapleType is 0.
Where
value3
is one of the following:
true = Integrate several page and folds.
false = Fold every page.
This feature is effective only in conjunction
with that StapleType is 0.
