4
.2
Appendix
FCC Information
The following information is applicable only to the machines installed in the United
States of America.
Label Identification
This equipment complies with Part 68 of the FCC rules. On the rear of this equipment is a
label that contains, among information, the FCC Registration Number and Ringer
Equivalence Number(REN) for this equipment. You may need to provide this information
for your telephone company.
Type of Service
This equipment is designed to be used on standard device telephone lines. Connection to
telephone company provided coin service(central office implemented systems) is
prohibited. Connection to party-line service is subject to state tariffs.
Telephone Company Procedure
The goal of the telephone company is to provide you with the best service it can. In order
to do this, it may occasionally be necessary for it to make changes in its equipment,
operation, or procedures. If these changes affect your service or the operation of the
equipment, the telephone company will give you notice, in writing, to allow you to make
any changes necessary to maintain uninterrupted service.
If you have any question about your telephone line, such as how many pieces of
equipment you can connect to it, the telephone company will provide this information
upon request.
In certain circumstances, it may be necessary for the telephone company to request
information from you concerning the equipment which you have connected to your
telephone line. Upon request of the telephone company, provide the FCC registration
number and the Ringer Equivalence Number(REN) which is connected to your line; both
of these items are listed on the equipment label and in the Service information chapter of
this guide. The sum of all of the RENs on your telephone line should be less than 5 in
order to assure proper service from the telephone company. In some cases, a sum of 5
may not be usable on a given line.
About Interference
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more the following
measures:
PLEASE CHECK!!
