Xerox Wireless Print Solutions Adapter, User Manual

Page: 51 / 54

Xerox
®
Wireless Print Solutions Adapter
User Guide
51
B
Regulatory
Notice to Users in the European Union
Hereby, Xerox declares that Wireless Print Adapter is in compliance with Directives 1999/5/EC, 2006/95/EC,
2004/108/EC, 2002/95/EC, and 2009/125/EC.
The full text of the EU declaration of conformity is available at the following Internet address:
www.xerox.com/enviornment_europe.
Notice to Users in the United States
The Wireless Print Adapter has been tested and found to comply within the limits for Class B digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio and television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the device with its built-in receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
(4) Consult the dealer or an experienced radio/TV technician for help.
The user is cautioned that changes and modifications made to the equipment without the approval of
manufacturer could void the user's authority to operate this equipment.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
The radiated output power of the print server is far below the FCC radio frequency exposure limits.
Nevertheless, the print server shall be used in such a manner that the potential for human contact during
normal operation is minimized.
To satisfy RF exposure requirements, this device and its antennas must operate with the separation
distance of at least 20 centimeters from all persons and must not be co-located or operating in conjunction