Xerox WC5632, Service Manual

Page: 23 / 187

September 2008
5-23 WorkCentre 5687 Family
PL 5.17
Parts Lists
PL 5.17 Feed Assembly (45-87 ppm W/
TAG D002)
Item Part Description
1 113R00718 Feed roll assembly (REP 5.14)
2 130E11200 Feed sensor (Q05-330)
3 – Front cover (P/O PL 5.17 Item 18)
4 – Feed housing (P/O PL 5.17 Item
18)
5 – Nudger motor (P/O PL 5.17 Item
18) (MOT05-010)
6 – Feed yoke (P/O PL 5.17 Item 28)
(W/TAG D-001)
7 – Spring (P/O PL 5.17 Item 18)
8 – Bearing (P/O PL 5.17 Item 18)
9 005K12600 Feed clutch (CL05-025)
10 – Rear cover (P/O PL 5.17 Item 18)
11 110E13480 Top cover interlock switch (S05-
305)
12 – Front feed gate (P/O PL 5.17 Item
18)
13 – Rear feed gate (P/O PL 5.17 Item
18)
14 125E00430 Static eliminator
15 – Gear (P/O PL 5.17 Item 26)
16 127K53770 Feed motor (MOT05-020) (ADJ
5.1)
17 – Feed motor tension spring (red) (P/
O PL 5.10 Item 9)
18 059K64321 Feed assembly (complete) (NOTE
2) (W/TAG D-002)
19 – Shaft (P/O PL 5.17 Item 26)
20 – Bracket (P/O PL 5.17 Item 18)
21 802E87730 Feed roll assembly cover
22 – Intermediate feed bearing (P/O PL
5.17 Item 26)
23 – Bearing (P/O PL 5.17 Item 26)
24 004E22560 Feed motor bracket
25 – Ground harness (P/O PL 5.17 Item
18)
26 604K42680 DADH feed bearing kit (Complete)
27 – Nudger motor bracket (P/O PL 5.17
Item 18)
28 604K54340 Lever arm CRU spares kit (W/TAG
D-001)
29 – Shim kit (Not Spared) (W/TAG D-
003)
NOTE: 1. For the feed motor drive belt, refer to PL 5.35 Item
5.
NOTE: 2. When ordered to replace a pre D002 feed
assembly, also replace the DADH PWB PL 5.10 Item 5.
www
MK-Electronic
de