Xerox Versant 4100, User Documentation

Page: 107 / 445

• If the output still is unacceptable after repeatedly adjusting an option and running test prints, call
your Customer Support Center for assistance.
• The output of a print job, which uses a specific Advanced Stock Setup option, varies from day to
day. Settings that are used today cannot achieve the same desired output when used on different
day for that same print job. This is especially relevant if the room in which the press is located
experiences changes in temperature and humidity.
Advanced Stock Setup Options
For the Advanced Stock Setup feature, the following options are available:
• OK button: Select this button to save any changes made and close the Advanced Stock Setup
window.
• Cancel button: Select this to close the Advanced Stock Setup window without making any
changes.
• Stock by Name Only : Refer to Stock By Name Only .
• Multifeed Detection : Refer to Multifeed Detection .
• Tray Air Assist : Refer to Tray Air Assist .
• Enable Tray Heater : Refer to Enable Tray Heater .
• Aligner Roll Pressure : Refer to Aligner Roll Pressure .
• Regi-Loop : Refer to Regi-Loop .
• Pre Gate Roll Adjustment : Refer to Pre Gate Roll Adjustment .
• Test Print : Refer to Test Print .
• Primary Transfer Current Adjustment : Refer to Primary Transfer Current Adjustment .
• Secondary Transfer Voltage Adjustment : Refer to Secondary Transfer Voltage Adjustment .
• Transfer output adjustment for trail edge : Refer to Transfer Output Adjustment for Trail Edge .
• Adjustment of Paper Speed at Transfer : Refer to Adjustment of Paper Speed at Transfer .
• Fuser Temperature Adjustment : Refer to Fuser Temperature Adjustment .
• Fuser Speed Adjustment : Refer to Fuser Speed Adjustment .
• Alignment Profile : Refer to Alignment Profile .
• Fold Adjustment Profile : Refer to Fold Adjustment Profile .
• Paper Curl Correction : Refer to Paper Curl Correction .
Stock By Name Only
When this option is selected (yes or true), stock can be selected from the print server or from the print
driver of the client only by explicitly selecting its specific stock name (as shown in the Stock Library)
and not by matching various parameters (such as weight, type, and coating). Selecting this option (by
placing a check mark in the box) can prevent the inadvertent use of expensive or specialty stocks for
slip-sheets, automatic paper selection, or generic paper requests by the user.
Tip: The behavior of this option is dependent on print server implementation; therefore, the
functionality of this option may vary from one print server to another. Furthermore, because
the option is dependent on print server implementation, this option may not function as
detailed here.
107